Skip to main content

Mudjacking Kansas City

Edit Template

Are Mudjacking and Poly Foam Lifting Safe for Pool Decks?

A sinking pool deck can make you nervous about more than the concrete. There’s the raised edge that catches bare feet. The puddle that forms near the steps. And the question of whether repairing the deck could damage the pool itself. Do you need to tear out the concrete, or can it be lifted safely? Mudjacking and polyurethane foam lifting can both be suitable options for raising settled pool deck slabs. The right approach depends on the concrete’s condition, what caused it to sink, and how the deck connects to the surrounding pool features. Here’s what St. Louis homeowners should know before scheduling a repair. Why Does Concrete Around a Pool Sink? Concrete needs solid support underneath it. When the ground settles or supporting material washes away, the slab above it can drop. Pool decks can be especially prone to settlement because installing a pool involves digging and backfilling around the structure. That fill may settle over time, leaving gaps beneath the concrete. Water can also contribute to the problem. Leaking plumbing, poor drainage, and water entering open joints can affect the material supporting the deck. In St. Louis, seasonal moisture changes and freezing weather can add to movement around outdoor concrete. Signs of settlement include uneven joints, low spots that hold water, and sections that have dropped near the pool edge. Before lifting begins, the contractor should evaluate why the concrete moved and whether another repair is needed. How Does Mudjacking Repair a Pool Deck? Mudjacking uses a cement-based slurry to fill spaces beneath settled concrete and raise the slab. The mixture commonly contains water, cement, and sand or other mineral material. The crew drills access holes through the affected section, then pumps the mixture beneath it. As material is placed, the contractor monitors the slab and controls the lift. The holes are patched after the work is complete. For concrete that remains in repairable condition, pool deck leveling with mudjacking can restore support and reduce uneven transitions without removing the existing slabs. The repair should follow a plan for that specific deck. The contractor needs to consider the amount of settlement, the slab’s condition, and any nearby pool components that could be affected by movement. How Does Polyurethane Foam Lifting Work? Polyurethane foam lifting, also called polyjacking, uses expanding foam beneath the slab. The contractor drills injection holes through the concrete and introduces the material below it. As the foam expands, it fills space and can raise the settled section. The crew watches the movement throughout the process and patches the holes afterward. Like mudjacking, polyurethane foam pool deck lifting focuses on supporting and raising existing concrete. It can be an option for suitable slabs that have dropped because of lost support underneath. Both methods require careful material placement and controlled lifting. A contractor should explain why the proposed approach fits your deck and what results you can reasonably expect. Can Lifting the Deck Damage the Pool? Pool deck lifting requires extra care because the work happens beside structures and connections that should remain in place. Pool walls, coping, skimmers, and plumbing all need attention during the evaluation. Coping is the finished edge around the top of the pool. How the concrete meets that edge can influence the repair plan. Before work begins, tell the contractor about: Known plumbing leaks or unexplained water loss. Previous pool or deck repairs. Loose coping or damaged pool edges. Water features and lines near the affected concrete. Any planned pool renovation work. Ask how the crew will monitor movement and protect nearby features. Depending on the pool’s condition, a pool professional may need to be involved. Also ask about the required water level. Do not drain the pool in preparation unless the professionals handling the project instruct you to do so. Are the Materials Safe Around Pool Water? The contractor should explain which lifting material will be used and what precautions apply during installation. Mudjacking mixtures and polyurethane products vary. Ask for information about the specific material, including curing requirements and when the area can reopen. The repair plan should include protecting the pool water from debris, managing the work area, and cleaning up afterward. Children and pets should stay away from equipment, hoses, and unfinished work until the crew gives the all-clear. A useful question is: “What do we need to do before, during, and after the repair?” You should receive practical instructions that apply to your project. Will Leveling Remove Trip Hazards and Puddles? Raising settled concrete can reduce the height difference between neighboring slabs. That creates a more even walking surface and can reduce tripping hazards around the pool. Drainage needs a separate review. A pool deck should have a planned slope toward suitable drainage areas. “Leveling” does not mean making the entire deck perfectly flat. If a sunken section collects water, lifting may improve that low spot. However, surrounding slabs, fixed pool features, and drain locations can limit the adjustment. Ask where water will go after the repair. Also remember that lifting does not erase cracks, restore worn finishes, or correct a slippery surface. Those concerns may require additional work. When Is Pool Deck Lifting a Good Option? Lifting is worth considering when the concrete has settled but remains sound enough to move as a section. A deck with badly crumbling concrete or slabs broken into unstable pieces may need partial or full replacement. An active leak or pool structural problem may also need attention before concrete lifting proceeds. During the estimate, ask which sections can be repaired, what unevenness may remain, and whether joint sealing or drainage work is included. Discuss visible patch marks and warranty terms as well. Clear expectations help you understand what the repair will accomplish. Repairing a Sunken Pool Deck in St. Louis Uneven pool deck concrete does not automatically require demolition. Mudjacking and polyurethane foam lifting both offer ways to raise suitable slabs and restore support beneath them. The first step is an evaluation of the concrete, nearby pool features, and

Why Does Concrete Sink in the Midwest?

That bump at the garage entrance didn’t always exist. Neither did the raised sidewalk edge or the puddle that now sits on your patio after every storm. Concrete settlement often starts slowly. One section drops a little, then the uneven surface becomes hard to ignore. For homeowners in St. Louis and across the Midwest, the cause often lies below the slab. The short answer: Concrete sinks when the ground underneath can no longer support it evenly. Water, changing soil moisture, winter weather, and poorly packed fill can all play a role. 1. Water Washes Away the Support A concrete slab needs a stable base. When water repeatedly flows beneath it, that support can start to disappear. A downspout emptying beside the driveway, runoff crossing a patio, or water entering open joints can carry away soil and small particles. Over time, empty spaces develop beneath the concrete. With less material holding it up, part of the slab can drop. Once concrete sinks, the new slope may send even more water toward the problem area. That is why checking drainage matters just as much as noticing the uneven surface. 2. Clay Soil Changes with the Weather Some clay soils swell when they absorb moisture and shrink as they dry. That movement can affect the concrete resting above them. Think about a wet spring followed by a long, dry summer. Where expansive clay is present, shrinking soil can leave a slab with less support. The amount of movement depends on the soil and conditions at the property. “Clay-heavy soils that expand and contract” — Foamjection, identifying a common cause of settlement in its Ohio concrete lifting guide. This article draws on Foamjection’s published insight into the soil conditions behind sinking concrete. 3. Freezing and Thawing Move the Ground Midwest winters add another challenge. In frost-sensitive soil, growing layers of ice can push the ground and concrete upward. This movement is called frost heave. When that ice melts, the ground can settle again. Wet soil may also provide weaker support during the thaw. If one section moves more than another, the surface can become uneven. A sidewalk that rises in winter and drops in spring may have a seasonal movement problem. Tell your contractor when you notice changes so the inspection considers more than the slab’s height on one day. 4. The Original Fill Wasn’t Packed Firmly Enough Not every sinking slab starts with a weather problem. Sometimes the issue goes back to construction. Builders move soil to install foundations, utilities, and other features. If the replaced soil is not compacted properly before concrete is poured, it can settle later under its own weight and the weight above it. This can leave concrete near a house or utility trench sitting over an uneven base. The surface may look fine at first, while settlement develops over time. What Should You Watch For? A growing drop where the driveway meets the garage. Sidewalk edges that catch your shoes or trip visitors. Water pooling on concrete or flowing toward the house. Visible gaps beneath the edges of patios or walkways. Slabs that tilt or sit lower than neighboring sections. Take photos of changes and check where water goes during rain. Those details can help a contractor understand what is happening beneath the surface. Can You Help Prevent More Settlement? Start with water management. Keep gutters clear, check downspout outlets, and look for soil washing away along slab edges. Have leaking drains or pipes repaired, and ask about sealing open concrete joints where appropriate. These steps cannot undo existing settlement or guarantee that soil will stop moving. They can help reduce avoidable water problems around your concrete. If an area keeps sinking after a repair, it deserves a closer look at the underlying cause before another repair is planned. Does Sunken Concrete Need to Be Replaced? Not always. If the slab is still in suitable condition, mudjacking may lift it without removing the existing concrete. St. Louis Mudjacking pumps a grout mixture beneath settled slabs to fill voids and carefully raise the surface. Badly crumbled or severely broken concrete may need replacement instead. Repair planning should also address drainage or other conditions causing the settlement. Raising a slab does not fix a leaking pipe or redirect a downspout. Get Answers About Your Sinking Concrete An uneven driveway or walkway does not automatically mean a full tear-out. Find out what caused the problem and whether your concrete can be lifted. Request Your Free Quote

Mudjacking Kansas City

Mudjacking Kansas City helps homeowners, businesses, and property managers lift, level, and stabilize sinking concrete throughout Kansas City and surrounding communities in Missouri and Kansas. We provide mudjacking for driveways, sidewalks, walkways, patios, porches, steps, garage floors, pool decks, commercial floors, and other concrete slabs.

If uneven concrete is creating a trip hazard, drainage problem, or unwanted gap, call or text us for an honest recommendation and a free estimate. Mudjacking can provide an affordable way to fix settled concrete without tearing it out and replacing it.

Get an Estimate

Uneven sidewalk becoming a trip hazard? or Patio collecting water or sloping toward your home?

Tell us what is going on, and we’ll help you determine the right next step.

Call or Text

Hours We’re Open

Mon to Sun – 8:00 a.m. to 9:00 p.m.

Our phone lines are open 24/7.

If we don’t answer, please leave a message and we’ll get back to you shortly.

Voicemail open 24 hours.

© 2026 Mudjacking Kansas City. All Rights Reserved.

Edit Template